PIERCE
LAND
CLEARING
Pierce Land Clearing provides land clearing, forestry mulching, and lot clearing across Springtown, TX and north Parker County. We clear cedar out of the Cross Timbers oaks, open up small acreage for builds, and reclaim pasture that mesquite has taken back. One call gets you honest day rates, a real timeline, and a crew that leaves your good trees standing.
Tell us about your property. We usually reply the same day.
Takes about 30 seconds. No spam, no sales calls, just your quote.
Land clearing in Springtown, Texas is Western Cross Timbers work, and the ground tells you that before the machines do. North Parker County is sandy loam over sandstone, post oak and blackjack oak holding the draws, and cedar filling every gap that fire used to keep open. On the tracts along Walnut Creek and the FM roads off Highway 199 the job is usually the same one: a good stand of oaks buried under juniper and greenbriar, with mesquite working across whatever pasture got opened up and then left alone.
Around Springtown, Reno, Azle, and Poolville we handle cedar and juniper removal, understory mulching that leaves the post oaks standing, homesite and pad clearing for the Fort Worth commuters buying five and ten acre tracts, fence line corridors, and pasture reclamation. Forestry mulching grinds everything in place, so there are no burn piles and no haul trucks, and the mulch layer stays on the ground. On sand that matters more than it does on blackland, because bare Cross Timbers soil moves the first time it rains hard.
Pricing is straightforward. Skid steer mulchers run $3,000 per day with transport included. High horsepower dedicated mulchers run $4,000 per day plus transport. Photos or onX pins get most Parker County quotes done the same day, whether you are in Springtown, Reno, Azle, Poolville, or out toward Boyd. Call 512-400-2693 and a project manager will answer, seven days a week.
A full service land clearing company serving Springtown, Reno, Azle, Poolville, and north Parker County.
Brush and small trees ground into soil-protecting mulch in one pass. No burning, no hauling.
Cut the fire load, free the water table, and open sightlines on cedar-choked ground.
Reclaim overgrown lots, pastures, and fence lines from mesquite and scrub.
Selective take-downs and stump grinding for clean, open ground.
Grubbing, grading, and pad prep that hands your builder permit-ready dirt.
Sandstone ledge and caliche crushed and milled on site into base material for drives, pads, and ranch roads.
Clean corridors for new fencing, utilities, and access roads.
Residential and commercial lots cleared, leveled, and ready.
Stock tanks and ponds dug, shaped, and finished right.
From half acre homesites to utility scale projects, the equipment and crew scale to the job.
Utility corridors, pasture reclamation, invasive cedar and mesquite removal, and prep for whatever you are planning next.
Lot clearing, grubbing, and pad prep that keeps your build schedule on track.
Mesquite and cedar removal, pasture and grazing recovery, fence lines, senderos, stock tanks, and ranch roads.
Multi lot and large acreage clearing with ground left ready for survey, permitting, and infrastructure.
Utility scale site clearing, vegetation removal, and access roads for solar projects across Central Texas.
Transmission lines, pipelines, and fence and utility row corridors cleared to spec and on schedule.
Parks, drainage easements, fire mitigation, and public land maintenance. Easy to work with on bids and compliance.
Senderos, plot clearing, feeder and blind access, and trail systems that make your property huntable again.
A lot of land clearing companies rent whatever the equipment yard has that week. We own purpose-built forestry machines and match them to your terrain. Not sure which machine your property needs? Try our cost calculator for an instant answer.
Our high horsepower dedicated mulchers run 300+ HP and chew through heavy cedar and mesquite at a pace no skid steer can match. That is how big tracts get cleared in days instead of weeks. We bring these machines when your material runs bigger than 8 inches in diameter and the property has access for an 11 foot wide machine.
For material up to 8 inches in diameter, our skid steer mulchers fill the gap. Subdivision lots, tree preservation, tight fence lines, and finish work around structures, they get in where the big machines cannot. Low ground pressure protects your topsoil, and they clear selectively around the oaks you want to keep.
The photos on this page come from our cedar clearing in the Western Cross Timbers, the same sandy country and the same juniper problem you have in north Parker County. For a full job written up start to finish, see our 3 acre selective homesite clearing project in Cleburne: shade trees flagged and kept, everything else mulched, build ready in a single day.
Nearest documented project: 3 acre selective homesite clearing in Cleburne
Send photos and property details for a fast quote, or meet us on-site and we will walk it with you. Either way you get a firm number, free.
Our crew and machines do the work, selectively and cleanly. The mulch stays right where it falls, protecting the soil and feeding the grass. No burn piles, and no haul off needed.
You get open ground, clean sightlines, and land you can actually use again. If your project calls for full site prep, we handle that too.
Every property is different, so price comes down to a few things: how many acres, how thick the cedar and greenbriar are, what stays, and access. Transport to Parker County is built into the quote up front, so the number you get is the number you pay.
Most companies make you chase a number. Here is ours. The machine we bring depends on the size of your material and the access on your property.
Plus transport to your site
Transport included
Day rates help you budget. When you send photos or have us walk the property, you get a firm total for the whole job, free either way. For a deeper breakdown, read our guide on what it costs to clear land in Texas.
Taylor is a great guy and definitely knows his stuff. His level of experience can help to avoid problems before they happen. Also one of the few companies that has access to a variety of machine sizes to be able to tackle nearly any job.
Google review
They came out when they said they would and worked long days getting about 10 acres of mesquite cleared. It looks amazing now. Dillon is a hard worker and was able to advise on and execute a great strategy for attacking the project. I am very happy with the results.
Google review
They did an amazing transformation on our property. We had a jungle and we were left with a beautiful future homesite. They showed up with newer equipment which lessens the chance of breakdowns. Very personable and professional.
Google review
Rural Parker County clearing on your own land needs no permit, and agricultural work is exempt from most regulation in Texas. Inside Springtown city limits, clearing tied to a build runs through the normal permitting process, and floodplain rules apply along Walnut Creek and its tributaries. We flag anything that needs attention when we quote the job.
Estimates usually happen within a few days of your call. Most residential jobs run one to three days on site, and larger acreage moves at several acres a day with the dedicated mulchers. One local quirk: post oak sand works wet a good deal better than clay does, so we lose fewer days to rain here than crews do east of the Trinity. You get a start window with your quote and a heads up before we roll in.
Skid steer mulchers run $3,000 per day with transport included, for material up to 8 inches in diameter. High horsepower dedicated mulchers run $4,000 per day plus transport, for heavy cedar and bigger acreage. Most north Parker County work is small acreage, so send photos and acreage and we will get you a real number, usually the same day.
We work the Western Cross Timbers constantly, and the photos on this page are from cedar jobs in that same country north and west of here. We have not published a Springtown job write up yet, so we will tell you that straight rather than dress up somebody else’s photos as yours.
That is the standard Springtown job. Post oak and blackjack oak do not transplant and do not come back if you lose them, so we flag the keepers, mulch the juniper and greenbriar out from under them, and leave the canopy alone. Selective work costs more per acre than a full clear and it is almost always worth it here.
It can if you scrape it. That is the main argument for mulching in Cross Timbers sand instead of dozing and raking: the ground cover goes down as a mulch mat that holds the soil in place through the first hard rain and breaks down into the grass. We do not leave bare sand on a slope.
With mulching, nothing needs to leave your property. Everything grinds into a mulch layer that protects the soil, holds moisture, and feeds the grass as it breaks down. There are no brush piles to burn and no haul off trucks to pay for, which is a big part of why mulching costs less than traditional clearing.
Yes, and that is most of what north Parker County is buying right now. We open the building envelope, cut the drive line, keep the trees that make the lot worth owning, and mill sandstone and caliche on site into base for the drive when the ground gives us the material.
In thick Cross Timbers cedar a dedicated mulcher covers 1.5 to 2.5 acres a day depending on density, and open mesquite pasture runs faster. Skid steers average half to three quarters of an acre. We give you a day count with the quote, not a vague range.
Yes. Photos, an aerial screenshot, or onX pins with the areas marked get most Springtown quotes done the same day. Flag your keep trees and we will price the work without you waiting on a site visit.
Every job we publish carries the acreage, the machines, the days on site and what it actually cost. 41 projects documented across Texas so far.
See all our documented projectsFrom Springtown we cover north Parker County and the country along Highway 199: Reno, Azle, Poolville, Agnes, Briar, and Cool. Close by we also serve Weatherford, Decatur, Alvord, and Jacksboro. We also work Sanctuary and Reno. Somewhere else in north Texas? Browse every area we serve or just call.
Quick quotes, competent operators, and top of the line equipment. Dedicated project managers who actually answer the phone, and a family business that actually cares about making customers happy.