PIERCE
LAND
CLEARING
Every Texas fence line is a tree nursery: birds plant cedar, mesquite, and hackberry along the wire, and twenty years later the fence is gone and the row is a thicket. We clear fence lines the working way, mulched or grubbed to the root, wire respected, corridor left ready for the fence builder, with documented projects to show for it.
The wire feeds the trees: birds perch, seeds drop, and the one strip you cannot shred becomes the thickest brush on the place.
Cedar in the Hill Country, mesquite in brush country, hackberry and elm everywhere: fence lines collect whatever the birds are eating, protected from the shredder by the wire itself. Give the row twenty years and the trees own the fence, the staples, and a strip of pasture thirty feet wide on both sides. It is the most predictable brush problem in Texas, and the most postponed.
A fence you cannot rebuild, because no builder can work in a thicket. A property line you cannot see, which becomes a survey argument. Predator and pig highway straight through the place, and a firebreak that is now a fuse. Clearing the row gives you back the fence, the line, and the strip of grazing on both sides, and it is the first job every fence contractor wishes you had already done.
Three documented jobs, one sequence: what an overgrown line looks like, what the work looks like, and what you get back.
Overgrown rows opened back up so the old wire can come out and the new fence can go in. The corridor gets cleared to working width, and the fence builder gets a line they can actually build on.
Hill Country cedar mulched off the wire, post oak and yaupon rows opened in the east, pine corridors in the Pineywoods. The species changes by county; the finished corridor does not.
Mesquite in a fence row regrows from the roots the wire protects, so mulching alone just reschedules the job. Where mesquite owns the row, our grubbing crew pulls the crowns without wrecking the fence.
Boundary and survey lines cut clean so the pins can be found and the line can be seen, the first step before a sale, a subdivision, a new fence, or a friendly end to a boundary argument.
New interior fence lines cut through standing brush for rotational grazing: corridor cleared, roots handled per your fence spec, and the line ready for posts the day we leave.
The thirty-foot strip the fence row stole on both sides, taken back: brush out, edges feathered into the pasture, and the grazing math improved along every foot of wire.
By the machine day against the miles and the density, same published logic as all our clearing: a light cedar row moves fast, a twenty-year mesquite row with the wire buried in it does not. Our published price page carries the day rates the quote is built from, and photos of your row texted to 512-400-2693 get a same-day ballpark by the stretch.
Whether the old wire stays or goes, because working over live wire is slower than clearing a dead row for replacement. Whether the spec is mulch or root-out. Tree size against the fence, gates and water gaps, and how much of the row the machine can walk versus reach. All of it gets read from your photos or a drive-by, and written before the work.
The machine that clears a fence row has to respect what it cannot always see: wire gone slack under brush, old staples, T-posts leaned into trunks. Our operators work fence rows at fence-row pace, close mulching along the line, excavator pulls where the trunks stand in the wire, and the fence that was staying intact stays intact. The rows we clear do not come with a fencing bill we caused.
Fence row strategy is species strategy. Cedar dies when cut, so mulching the row kills it and feeds the ground. Mesquite regrows from the crown the wire protects, so a mulched mesquite row is a two-year loan; the crowns have to come out. We run both methods, often on the same mile of fence, and the quote says which stretch gets which and why.
The fence builder needs a clear working corridor, visible line, and ground their auger can meet without eating roots. That is our finish spec on every row: brush gone, stumps to grade or grubbed per the plan, wire exposed for removal if the fence is being replaced, and the corridor wide enough to work. Fence contractors send us their overgrown jobs for a reason.
Our Lometa project page is literally titled cedar and fence lines: a documented, photographed fence row job with the write-up public. Add the Melvin lanes and the grubbing projects around Bertram fence country, and the pattern is clear: this is standing work for us, not a sideline.
Very polite and did an amazing job get my fence line cleared up… will be having them back out to clear up my back 40
Jason Peachey, Google review
From start to finish, the experience was absolutely amazing. The team arrived on time, worked with great attention to detail, and made sure everything was done perfectly. Their professionalism, honesty, and hard work really stood out. The quality of their work exceeded my expectations, and the finished results look incredible.
Emma Lee, Google review
These guys are fantastic! They are extremely knowledgeable about their craft and are great to work with. These are my go to guys if I need to get land cleared quickly, professionally, and efficiently! Thanks for being there for us! See you soon!!
J.r. Marquez, Google review
By the machine day against the length and density of the row: light cedar moves fast, old mesquite with wire buried in it does not, and mulch versus root-out changes the day count. Our published price page carries the day-rate logic, and photos of your row get a same-day ballpark by the stretch.
That is the trade skill: close mulching along live wire, excavator pulls where trunks stand in the fence, and fence-row pace instead of open-pasture pace. If the fence is being replaced anyway, we clear faster and expose the old wire for removal.
Species decides: cedar dies when cut, so mulch it; mesquite regrows from the protected crown, so grub it. Most long rows get both treatments by stretch, and the quote maps which is which.
Yes, and fence contractors hand us exactly this job: corridor cleared to working width, line visible, stumps handled to your builder’s spec, old wire exposed for pull-out. The row is buildable the day we leave.
Regularly: boundary corridors cut clean so pins can be found and lines can be seen, ahead of sales, surveys, subdivisions, and new fences. A visible line settles most boundary arguments on its own.
Our fence and corridor work is documented from Lometa to Melvin and the range runs statewide with the rest of our operation. Fence jobs bundle beautifully with grubbing, tanks, and pasture work, one mobilization, one written quote.
Photos of the row and a rough length get a same-day ballpark. The corridor comes back fence-ready, and the wire stays where you wanted it.
