PIERCE
LAND
CLEARING
Pierce Land Clearing provides land clearing, forestry mulching, and pasture reclamation across Millsap, TX and west Parker County. We take mesquite off the flats, pull cedar off the ridges above the Brazos, and cut hunting lanes and ranch roads on big acreage. Honest day rates, a real day count, and the hardwoods left where they belong.
Tell us about your property. We usually reply the same day.
Takes about 30 seconds. No spam, no sales calls, just your quote.
Land clearing in Millsap, Texas is ranch work, not lot work. West Parker County runs down to the Brazos, and the land changes as it goes: mesquite spread across the open flats, cedar holding the ridges and the breaks above the river, and hardwood bottom along the water that nobody should be touching with a dozer. The tracts out here are measured in tens and hundreds of acres, and the reason people call is almost always the same one. Grazing has quietly turned into brush and they want the pasture back.
Around Millsap, Brock, Garner, and the Brazos bottoms we handle mesquite and cedar removal, pasture reclamation, hunting lane and trail cutting, fence line corridors, ranch road access, and selective clearing along the river where the hardwoods stay. Forestry mulching grinds everything in place, so the organic matter goes back into ground that needs it instead of into a burn pile, and there is no root plowing scar to reseed. On big acreage that is the difference between grass coming back this year and grass coming back in three.
Pricing is straightforward. Skid steer mulchers run $3,000 per day with transport included. High horsepower dedicated mulchers run $4,000 per day plus transport, which is the machine most Millsap ranch work needs. Photos, aerials, or onX pins get most Parker County quotes done the same day. Call 512-400-2693 and a project manager will answer, seven days a week.
A full service land clearing company serving Millsap, Brock, Garner, and west Parker County.
Brush and small trees ground into soil-protecting mulch in one pass. No burning, no hauling.
Cut the fire load, free the water table, and open sightlines on cedar-choked ground.
Reclaim overgrown lots, pastures, and fence lines from mesquite and scrub.
Selective take-downs and stump grinding for clean, open ground.
Grubbing, grading, and pad prep that hands your builder permit-ready dirt.
Limestone, sandstone, and caliche crushed and milled on site into base material for ranch roads, pads, and low water crossings.
Clean corridors for new fencing, utilities, and access roads.
Residential and commercial lots cleared, leveled, and ready.
Stock tanks and ponds dug, shaped, and finished right.
From half acre homesites to utility scale projects, the equipment and crew scale to the job.
Utility corridors, pasture reclamation, invasive cedar and mesquite removal, and prep for whatever you are planning next.
Lot clearing, grubbing, and pad prep that keeps your build schedule on track.
Mesquite and cedar removal, pasture and grazing recovery, fence lines, senderos, stock tanks, and ranch roads.
Multi lot and large acreage clearing with ground left ready for survey, permitting, and infrastructure.
Utility scale site clearing, vegetation removal, and access roads for solar projects across Central Texas.
Transmission lines, pipelines, and fence and utility row corridors cleared to spec and on schedule.
Parks, drainage easements, fire mitigation, and public land maintenance. Easy to work with on bids and compliance.
Senderos, plot clearing, feeder and blind access, and trail systems that make your property huntable again.
A lot of land clearing companies rent whatever the equipment yard has that week. We own purpose-built forestry machines and match them to your terrain. Not sure which machine your property needs? Try our cost calculator for an instant answer.
Our high horsepower dedicated mulchers run 300+ HP and chew through heavy cedar and mesquite at a pace no skid steer can match. That is how big tracts get cleared in days instead of weeks. We bring these machines when your material runs bigger than 8 inches in diameter and the property has access for an 11 foot wide machine.
For material up to 8 inches in diameter, our skid steer mulchers fill the gap. Subdivision lots, tree preservation, tight fence lines, and finish work around structures, they get in where the big machines cannot. Low ground pressure protects your topsoil, and they clear selectively around the oaks you want to keep.
The photos on this page are from our cedar and ranch clearing in north Texas, the same country and the same machines we bring to Parker County. For a documented job on solid cedar, see our 15 acre cedar clearing project in Hico, and for pasture put back into production, our 125 acre reclamation in Elgin. Both are the Millsap job at different sizes.
Documented nearby: 15 acres of solid cedar cleared in Hico
Send photos and property details for a fast quote, or meet us on-site and we will walk it with you. Either way you get a firm number, free.
Our crew and machines do the work, selectively and cleanly. The mulch stays right where it falls, protecting the soil and feeding the grass. No burn piles, and no haul off needed.
You get open ground, clean sightlines, and land you can actually use again. If your project calls for full site prep, we handle that too.
Every ranch is different, so price comes down to a few things: acreage, how thick the mesquite and cedar are, what stays, and how the machines move across the place. Transport to Parker County is built into the quote up front, so the number you get is the number you pay.
Most companies make you chase a number. Here is ours. The machine we bring depends on the size of your material and the access on your property.
Plus transport to your site
Transport included
Day rates help you budget. When you send photos or have us walk the property, you get a firm total for the whole job, free either way. For a deeper breakdown, read our guide on what it costs to clear land in Texas.
Very hard worker, great work and can handle just about anything that's thrown his way.
Google review
A great investment for our property. Showed up exactly when Preston said he would, worked hard all day long without a break with a beast of a machine. He had a very good understanding of what I wanted to do, and did it. The results are fantastic.
Google review
Amazing service and final product. Hunter, Jonathan and Dustin were the operators for both the tree mulcher and the rock mulcher. Their work completely transformed my property. My only regret is that I did not have it done sooner.
Google review
Rural Parker County clearing on your own land needs no permit, and agricultural work is exempt from most regulation in Texas. Floodplain rules apply along the Brazos River and its tributaries, and if your place is under a wildlife management or grazing plan the clearing usually helps your case rather than hurting it. We flag anything that needs attention when we quote the job.
Estimates usually happen within a few days of your call. Most residential jobs run one to three days on site, and larger acreage moves at several acres a day with the dedicated mulchers. One local quirk: post oak sand works wet a good deal better than clay does, so we lose fewer days to rain here than crews do east of the Trinity. You get a start window with your quote and a heads up before we roll in.
Skid steer mulchers run $3,000 per day with transport included, for material up to 8 inches in diameter. High horsepower dedicated mulchers run $4,000 per day plus transport, and that is the machine most Millsap ranch work needs. Send acreage and photos or an aerial and we will get you a day count and a real number, usually the same day.
Yes, and it is the most common call we get out here. Mesquite mulched at the ground with the mat left in place lets grass come back the same season instead of the year after next. We will also tell you honestly what regrowth looks like and when you should plan a follow up pass.
No, and we will tell you when not to clear it at all. Hardwood bottom along the Brazos is worth more standing than cleared, for shade, for cover, and for what it does to your bank. We clear the cedar and brush working into it and leave the hardwoods.
Regularly. Lanes, senderos, and trail systems are straightforward mulcher work, and we lay them out with you on an aerial first so you get the sight lines and wind you actually want rather than a grid somebody drew in an office.
With mulching, nothing needs to leave your property. Everything grinds into a mulch layer that protects the soil, holds moisture, and feeds the grass as it breaks down. There are no brush piles to burn and no haul off trucks to pay for, which is a big part of why mulching costs less than traditional clearing.
Yes. Where the ground gives us the material we crush and mill limestone, sandstone, and caliche on site into base for roads, pads, and crossings, which beats trucking base in across west Parker County at current haul rates.
In heavy cedar a dedicated mulcher covers 1.5 to 2.5 acres a day depending on density. Open mesquite pasture runs considerably faster. On big Millsap tracts we will run more than one machine and give you the day count before you commit.
Yes. Photos, an aerial screenshot, or onX pins with the areas marked get most Millsap quotes done the same day. Mark what stays and we will price the work without you waiting on a site visit.
Every job we publish carries the acreage, the machines, the days on site and what it actually cost. 45 projects documented across Texas so far.
See all our documented projectsFrom Millsap we cover west Parker County and the Brazos country: Brock, Garner, Cool, Weatherford, and the ranch ground toward Palo Pinto. Close by we also serve Santo, Stephenville, Graham, and Granbury. We also work Cool. Somewhere else in north Texas? Browse every area we serve or just call.
Quick quotes, competent operators, and top of the line equipment. Dedicated project managers who actually answer the phone, and a family business that actually cares about making customers happy.