PIERCE
LAND
CLEARING
Pierce Land Clearing provides land clearing, cedar removal, and forestry mulching services across Lampasas, TX and Lampasas County. Our crews take cedar off the Cut Plain, give the springs room to run, and put ranches back to grass, with our documented Lometa project right in the county. Whether it is selective clearing around your good trees or a full clear cut, you get one crew, one honest price, and no burn piles left behind.
Tell us about your property. We usually reply the same day.
Takes about 30 seconds. No spam, no sales calls, just your quote.
Land clearing in Lampasas, Texas is spring country work with local proof attached: our documented cedar and fence line project at Lometa sits right in this county, photographed on this page. The Cut Plain cedar that drinks the springs and shades the grass comes out with high horsepower dedicated mulchers, and the ground goes back to work under a mulch layer that holds the soil.
Around Lampasas, Lometa, Kempner, and Adamsville we handle cedar removal and pasture reclamation, fence line and right of way clearing, homesite clearing along the 281 corridor, hunting lane cutting, storm cleanup, and brush work around tanks and pens. There are no burn piles waiting on a burn ban, and haul off is generally not needed with mulching.
Pricing is straightforward. Skid steer mulchers run $3,000 per day with transport included. High horsepower dedicated mulchers run $4,000 per day plus transport. Photos or onX pins get most Lampasas quotes done the same day, whether your place is on the creek, up 281, or out west toward Lometa. Call 512-400-2693 and a project manager will answer, seven days a week.
A full service land clearing company serving Lampasas, Lometa, Kempner, Adamsville, and all of Lampasas County.
Brush and small trees ground into soil-protecting mulch in one pass. No burning, no hauling.
Cut the fire load, free the water table, and open sightlines on cedar-choked ground.
Reclaim overgrown lots, pastures, and fence lines from mesquite and scrub.
Selective take-downs and stump grinding for clean, open ground.
Grubbing, grading, and pad prep that hands your builder permit-ready dirt.
Limestone and caliche crushed and milled on site into base material for ranch roads, pads, and crossings.
Clean corridors for new fencing, utilities, and access roads.
Residential and commercial lots cleared, leveled, and ready.
Stock tanks and ponds dug, shaped, and finished right.
From half acre homesites to utility scale projects, the equipment and crew scale to the job.
Utility corridors, pasture reclamation, invasive cedar and mesquite removal, and prep for whatever you are planning next.
Lot clearing, grubbing, and pad prep that keeps your build schedule on track.
Mesquite and cedar removal, pasture and grazing recovery, fence lines, senderos, stock tanks, and ranch roads.
Multi lot and large acreage clearing with ground left ready for survey, permitting, and infrastructure.
Utility scale site clearing, vegetation removal, and access roads for solar projects across Central Texas.
Transmission lines, pipelines, and fence and utility row corridors cleared to spec and on schedule.
Parks, drainage easements, fire mitigation, and public land maintenance. Easy to work with on bids and compliance.
Senderos, food plots, feeder and blind access, and trail systems that make your property huntable again.
A lot of land clearing companies rent whatever the equipment yard has that week. We own purpose-built forestry machines and match them to your terrain. Not sure which machine your property needs? Try our cost calculator for an instant answer.
Our high horsepower dedicated mulchers run 300+ HP and chew through heavy cedar and mesquite at a pace no skid steer can match. That is how big tracts get cleared in days instead of weeks. We bring these machines when your material runs bigger than 8 inches in diameter and the property has access for an 11 foot wide machine.
For material up to 8 inches in diameter, our skid steer mulchers fill the gap. Subdivision lots, tree preservation, tight fence lines, and finish work around structures, they get in where the big machines cannot. Low ground pressure protects your topsoil, and they clear selectively around the oaks you want to keep.
The fence right of way photos on this page are from our written up project at Lometa, right here in Lampasas County, three acres of cedar removal with clean fence lines to match, linked first in the carousel below. When we quote Lampasas work, we are pricing ground we already know.
Most recent Lampasas County project: June 2026
Send photos and property details for a fast quote, or meet us on-site and we will walk it with you. Either way you get a firm number, free.
Our crew and machines do the work, selectively and cleanly. The mulch stays right where it falls, protecting the soil and feeding the grass. No burn piles, and no haul off needed.
You get open ground, clean sightlines, and land you can actually use again. If your project calls for full site prep, we handle that too.
Every place is different, so price comes down to a few things: acreage, how old the cedar is, what stays, and access. Lampasas County is home range, so the number you get is the number you pay.
Most companies make you chase a number. Here is ours. The machine we bring depends on the size of your material and the access on your property.
Plus transport to your site
Transport included
Day rates help you budget. When you send photos or have us walk the property, you get a firm total for the whole job, free either way. For a deeper breakdown, read our guide on what it costs to clear land in Texas.
They did a great job for us. We had them clear our 4 acre residential lot of about 3 acres of cedar and yaupon. Some of the cedars were old and huge while other areas were very dense.
Google review
Great job, turned a jungle into a park at a fair price, done just in time before the rain. Thanks.
Google review
We are really happy with the work Pierce Land Clearing did for us! They were quick to respond to our initial inquiry, gave a free estimate on the work we wanted done, and completed the work quickly. All the machine operators were very nice.
Google review
Outside the Lampasas city limits, the county has no permit requirement for clearing your own land. Inside city limits the rules are light and mostly touch development. The considerations that come up are floodplain along Sulphur Creek and the Lampasas River, and burn bans that make mulching the default debris answer. We flag anything that needs attention when we quote the job.
Estimates usually happen within a few days of your call. Most residential jobs run one to three days on site, and larger acreage moves at several acres a day with the dedicated mulchers. One local quirk: the Blackland clay east of I-35 gets greasy after rain, so we watch the weather and schedule around it rather than tearing up your ground. You get a start window with your quote and a heads up before we roll in.
Skid steer mulchers run $3,000 per day with transport included, for material up to 8 inches in diameter. High horsepower dedicated mulchers run $4,000 per day plus transport, for old cedar and bigger ranch acreage. Send photos or onX pins and you will usually have a number the same day.
Plenty. Our written up cedar and fence line project in Lometa is in this county, linked first in the carousel below, and the fence right of way photos on this page are from that same Lampasas County work. This is home range, not a road trip.
Lampasas is the City of Springs, and the answer is all around town. Mature cedar drinks year round and intercepts rain before it reaches the ground. Clear the cedar off the ridges and draws and the seeps come back, the tanks hold longer, and the Sulphur Creek watershed gets its water back.
That is the core job on the Lampasas Cut Plain. Cedar and brush pull carrying capacity out of a pasture year over year, and mulching puts it back: brush ground in place, soil held by the mulch layer, and grass coming back through it the next season.
With mulching, nothing needs to leave your property. Everything grinds into a mulch layer that protects the soil and feeds the grass as it breaks down. There are no brush piles waiting on a burn ban to lift, and haul off is generally not needed.
It is documented on this very page: cedar ground off a fence right of way on our Lometa job in this county. Clean corridors let you see and fix your fence, and they double as firebreaks in dry years.
Lampasas is the crossroads of our western loop, 281 and 190 both run through our schedule weekly. Most jobs get on the calendar within a couple of weeks.
Yes. Photos, an aerial screenshot, or onX pins with the areas marked will get most Lampasas quotes done the same day. Mention gates and crossings and we will plan the machines accordingly.
Cedar and Fence LinesLometa: three acres cleared with clean fence lines to match.See the full project →
5 Acres, Trails ReopenedLlano: impassable trails cleared and widened, cedar out.See the full project →
8 Acres, Homesite PrepSan Marcos: pad and driveway graded, cedar mulched for the views.See the full project →
4.2 Acres, SelectiveSan Antonio: heritage trees protected between a highway and new homesites.See the full project →
12 Acres Grubbed in San AntonioSan Antonio: 12 acres grubbed and reclaimed as usable pasture.See the full project →
18 Acres, SelectiveEvant: 18 acres thinned selectively, hardwoods left standing.See the full project →
Hunting Lane ClearingMelvin: hunting lanes cut and a new right of way opened.See the full project →
40 Acres, Full ClearBastrop County: cedar and yaupon off, pasture back in production.See the full project →
12 Acres, SelectiveGeorgetown: cedar out, every oak preserved.See the full project →
Hilltop HomesiteHorseshoe Bay: one acre opened for a build with a view.See the full project →
127 Acres for the LCRAElgin: a full clear on a public utility timeline, wrapped in 37 days.See the full project →
125 Acres ReclaimedElgin: overgrown pasture put back to work.See the full project →
38 Acre Commercial SiteBrownsville: cleared for development in six days.See the full project →
15 Acres of Solid CedarHico: thick cedar taken down to open ground.See the full project →
9 Acre Pasture ReclamationDale: brush out and grass coming back, two days on site.See the full project →
6 Acres Mulched CleanMorgan: downed trees and brush ground in place.See the full project →
3 Acre HomesiteLexington: cedar removed, pad ready for the builder.See the full project →
Selective Homesite ClearCleburne: shade trees kept, everything else gone in a day.See the full project →From Lampasas we cover Lometa, Kempner, Adamsville, and the ranch country in every direction. Close by we also serve Lometa, Burnet, Evant, Goldthwaite, and Bertram. Somewhere else on the Cut Plain? Browse every area we serve or just call.
Quick quotes, competent operators, and top of the line equipment. Dedicated project managers who actually answer the phone, and a family business that actually cares about making customers happy.