PIERCE
LAND
CLEARING
Pierce Land Clearing provides land clearing, forestry mulching, and site prep across Hillsboro, TX and Hill County. We take mesquite and elm out of blackland fence rows, pull cedar off the limestone country toward Whitney, and clear tracts on the I-35 corridor to a spec a contractor can build on. Honest day rates and a real day count.
Tell us about your property. We usually reply the same day.
Takes about 30 seconds. No spam, no sales calls, just your quote.
Land clearing in Hillsboro, Texas happens where two very different landscapes meet. East and south of town is Blackland Prairie, deep dark clay that grew cotton for a century and now grows mesquite and elm anywhere a fence row went unattended. West toward Lake Whitney and the Brazos the ground turns to limestone and caliche and the cedar takes over. The Hill County job depends entirely on which side of that line your place sits on, and anybody quoting you without asking has not looked.
Around Hillsboro, Itasca, Abbott, and Whitney we handle mesquite and cedar removal, fence row and pasture reclamation, homesite and pad clearing, commercial and development tract work along the I-35 corridor, and access roads. Forestry mulching grinds everything in place, which on blackland means the organic matter goes back into clay that will take all of it you can give, and on the limestone side means no scraped caliche washing into a creek. No burn piles, no haul trucks.
Pricing is straightforward. Skid steer mulchers run $3,000 per day with transport included. High horsepower dedicated mulchers run $4,000 per day plus transport. Photos, aerials, a site plan, or onX pins get most Hill County quotes done the same day. Call 512-400-2693 and a project manager will answer, seven days a week.
A full service land clearing company serving Hillsboro, Itasca, Abbott, Whitney, and all of Hill County.
Brush and small trees ground into soil-protecting mulch in one pass. No burning, no hauling.
Cut the fire load, free the water table, and open sightlines on cedar-choked ground.
Reclaim overgrown lots, pastures, and fence lines from mesquite and scrub.
Selective take-downs and stump grinding for clean, open ground.
Grubbing, grading, and pad prep that hands your builder permit-ready dirt.
Limestone and caliche crushed and milled on site into base material for drives, pads, and farm roads.
Clean corridors for new fencing, utilities, and access roads.
Residential and commercial lots cleared, leveled, and ready.
Stock tanks and ponds dug, shaped, and finished right.
From half acre homesites to utility scale projects, the equipment and crew scale to the job.
Utility corridors, pasture reclamation, invasive cedar and mesquite removal, and prep for whatever you are planning next.
Lot clearing, grubbing, and pad prep that keeps your build schedule on track.
Mesquite and cedar removal, pasture and grazing recovery, fence lines, senderos, stock tanks, and ranch roads.
Multi lot and large acreage clearing with ground left ready for survey, permitting, and infrastructure.
Utility scale site clearing, vegetation removal, and access roads for solar projects across Central Texas.
Transmission lines, pipelines, and fence and utility row corridors cleared to spec and on schedule.
Parks, drainage easements, fire mitigation, and public land maintenance. Easy to work with on bids and compliance.
Senderos, plot clearing, feeder and blind access, and trail systems that make your property huntable again.
A lot of land clearing companies rent whatever the equipment yard has that week. We own purpose-built forestry machines and match them to your terrain. Not sure which machine your property needs? Try our cost calculator for an instant answer.
Our high horsepower dedicated mulchers run 300+ HP and chew through heavy cedar and mesquite at a pace no skid steer can match. That is how big tracts get cleared in days instead of weeks. We bring these machines when your material runs bigger than 8 inches in diameter and the property has access for an 11 foot wide machine.
For material up to 8 inches in diameter, our skid steer mulchers fill the gap. Subdivision lots, tree preservation, tight fence lines, and finish work around structures, they get in where the big machines cannot. Low ground pressure protects your topsoil, and they clear selectively around the oaks you want to keep.
We work this part of Texas constantly and we can show you the receipts. Our 177 acre Dileo Solar project in Clifton was windrow and pile mulched to a fine solar spec in 32 days, about forty minutes west of Hillsboro. Our 6 acre project in Morgan is the small acreage version: downed trees and brush ground in place.
Documented nearby: 177 acres cleared to solar spec in Clifton, 32 days
Send photos and property details for a fast quote, or meet us on-site and we will walk it with you. Either way you get a firm number, free.
Our crew and machines do the work, selectively and cleanly. The mulch stays right where it falls, protecting the soil and feeding the grass. No burn piles, and no haul off needed.
You get open ground, clean sightlines, and land you can actually use again. If your project calls for full site prep, we handle that too.
Every property is different, so price comes down to a few things: acreage, whether you are fighting mesquite on blackland or cedar on limestone, what stays, the finish spec, and access. Transport to Hill County is built into the quote up front, so the number you get is the number you pay.
Most companies make you chase a number. Here is ours. The machine we bring depends on the size of your material and the access on your property.
Plus transport to your site
Transport included
Day rates help you budget. When you send photos or have us walk the property, you get a firm total for the whole job, free either way. For a deeper breakdown, read our guide on what it costs to clear land in Texas.
I highly recommend Pierce Land Clearing! They were incredibly responsive and had a crew on site within a few days of our initial contact. They worked for two days clearing the better part of our 19 acre site, and they were very reasonably priced. As a home builder, I have worked with a lot of clearing companies. I will definitely work with them again.
Google review
I think when people undergo such a large project, they have an unrealistic expectation of how it is going to turn out. This was not the case, it turned out to be exactly as I hoped it would. Everybody I have dealt with so far in this company has been great.
Google review
Never easy to write a big check, but well worth it. After two days they completely transformed a ten acre holly-choked mess into an open and inviting forest. Taylor bid the job and recommended the larger dozer-sized forestry mulcher.
Google review
Rural Hill County clearing on your own land needs no permit, and agricultural work is exempt from most regulation in Texas. Inside Hillsboro city limits, clearing tied to a build or a commercial site runs through the city process, and floodplain rules apply along the Nolan River and Aquilla Creek. We flag anything that needs attention when we quote the job.
Estimates usually happen within a few days of your call. Most residential jobs run one to three days on site, and larger acreage moves at several acres a day with the dedicated mulchers. One local quirk: the blackland clay here gets greasy after rain, so we watch the forecast and schedule around it rather than tearing up your ground. You get a start window with your quote and a heads up before we roll in.
Skid steer mulchers run $3,000 per day with transport included, for material up to 8 inches in diameter. High horsepower dedicated mulchers run $4,000 per day plus transport, which is the right machine for heavy cedar or a big tract. Send acreage and photos and we will get you a day count and a real number, usually the same day.
Ask us and we will tell you from an aerial. East and south of Hillsboro is deep blackland clay where the fight is mesquite, elm, and hackberry in the fence rows. West toward Whitney and the Brazos it turns to limestone and caliche and the fight is cedar. The machine, the pace, and the price all change with that answer.
Yes, and to a spec. Tell us the finish a contractor needs, whether that is fine mulch, grubbed, or selective with flagged trees left standing, and we quote to it. We have cleared a 177 acre solar site to a fine mulch spec in Clifton in 32 days, so a highway tract is well inside what we run.
More than most people expect. Blackland will take all the organic matter you can give it, and a mulch mat left on the surface cuts the cracking and the crusting that clay does when it is left bare. Scraping it and hauling the material off is the version that costs you money twice.
With mulching, nothing needs to leave your property. Everything grinds into a mulch layer that protects the soil, holds moisture, and feeds the grass as it breaks down. There are no brush piles to burn and no haul off trucks to pay for, which is a big part of why mulching costs less than traditional clearing.
Regularly, and it is one of the highest value days you can buy on a Hill County farm. We cut a corridor wide enough to work both sides of the wire, take out the mesquite and hackberry that grew through it, and grind everything in place rather than leaving you a windrow.
In heavy cedar a dedicated mulcher covers 1.5 to 2.5 acres a day depending on density. Open blackland with scattered mesquite runs considerably faster. Skid steers average half to three quarters of an acre. You get a day count with the quote.
Yes. Photos, an aerial screenshot, a site plan, or onX pins with the areas marked get most Hillsboro quotes done the same day, without you waiting on a site visit to get a number you can budget against.
Every job we publish carries the acreage, the machines, the days on site and what it actually cost. 45 projects documented across Texas so far.
See all our documented projectsQuick quotes, competent operators, and top of the line equipment. Dedicated project managers who actually answer the phone, and a family business that actually cares about making customers happy.