PIERCE
LAND
CLEARING
Pierce Land Clearing provides land clearing, forestry mulching, and pasture reclamation across Farmersville, TX and east Collin County. We clean out blackland fence rows, reclaim field edges and creek bottoms, and grind the piles waiting on a burn day.
Tell us about your property. We usually reply the same day.
Takes about 30 seconds. No spam, no sales calls, just your quote.
Land clearing in Farmersville, Texas is still mostly farm work, and that is the difference between here and the towns west of it. This is Blackland Prairie that is genuinely still being farmed and grazed, with hay meadows, cattle ground and old homeplaces rather than subdivisions. The clearing that gets called in reflects it: fence rows fifteen feet wide, creek bottoms full of elm and greenbriar, and barn lots that quietly turned into thicket.
Around Farmersville, Nevada, Blue Ridge and Caddo Mills we handle fence row clearing, pasture and field edge reclamation, storm cleanup, barn lot and homesite clearing, driveway corridors, and grinding the piles that have been stacked waiting on a burn day that never had the right wind. Mulching grinds it in place and puts the material back into blackland clay, which takes all the organic matter you can give it.
Pricing is straightforward. Skid steer mulchers run $3,000 per day with transport included. High horsepower dedicated mulchers run $4,000 per day plus transport. Photos, aerials or onX pins get most Collin County quotes done the same day. Call 512-400-2693 and a project manager will answer, seven days a week.
A full service land clearing company serving Farmersville, Nevada, Blue Ridge, Caddo Mills, and east Collin County.
Brush and small trees ground into soil-protecting mulch in one pass. No burning, no hauling.
Cut the fire load, free the water table, and open sightlines on cedar-choked ground.
Reclaim overgrown lots, pastures, and fence lines from mesquite and scrub.
Selective take-downs and stump grinding for clean, open ground.
Grubbing, grading, and pad prep that hands your builder permit-ready dirt.
Caliche and limestone crushed and milled on site into base material for drives, barn pads, and field roads.
Clean corridors for new fencing, utilities, and access roads.
Residential and commercial lots cleared, leveled, and ready.
Stock tanks and ponds dug, shaped, and finished right.
From half acre homesites to utility scale projects, the equipment and crew scale to the job.
Utility corridors, pasture reclamation, invasive cedar and mesquite removal, and prep for whatever you are planning next.
Lot clearing, grubbing, and pad prep that keeps your build schedule on track.
Mesquite and cedar removal, pasture and grazing recovery, fence lines, senderos, stock tanks, and ranch roads.
Multi lot and large acreage clearing with ground left ready for survey, permitting, and infrastructure.
Utility scale site clearing, vegetation removal, and access roads for solar projects across Central Texas.
Transmission lines, pipelines, and fence and utility row corridors cleared to spec and on schedule.
Parks, drainage easements, fire mitigation, and public land maintenance. Easy to work with on bids and compliance.
Senderos, plot clearing, feeder and blind access, and trail systems that make your property huntable again.
We own our machines rather than renting whatever the yard has that week. Not sure which one your ground needs? Try our cost calculator.
Material over 8 inches, heavy cedar and mesquite. Needs room for an 11 foot machine. How we choose.
Material up to 8 inches. Low ground pressure, tight access, and selective work around the trees you want kept.
The photos on this page are from our barn site, storm damage and tree clearing work on farm ground. For a full job written up start to finish, see our 9 acre pasture reclamation in Dale, brush out and grass back in two days on site, and our 6 acre forestry mulching project in Morgan where downed trees were ground in place.
Documented pasture work: 9 acres reclaimed in Dale, two days on site
Send photos and property details for a fast quote, or meet us on-site and we will walk it with you. Either way you get a firm number, free.
Our crew and machines do the work, selectively and cleanly. The mulch stays right where it falls, protecting the soil and feeding the grass. No burn piles, and no haul off needed.
You get open ground, clean sightlines, and land you can actually use again. If your project calls for full site prep, we handle that too.
Every place is different, so price comes down to acreage, how thick the fence rows and bottoms have gotten, what stays, and how the machines get through your gates. Transport to Collin County is built into the quote up front, so the number you get is the number you pay.
Most companies make you chase a number. Here is ours. The machine we bring depends on the size of your material and the access on your property.
Plus transport to your site
Transport included
Day rates help you budget. When you send photos or have us walk the property, you get a firm total for the whole job, free either way. For a deeper breakdown, read our guide on what it costs to clear land in Texas.
Very polite and did an amazing job get my fence line cleared up… will be having them back out to clear up my back 40
Google review
Pierce Land Clearing did a great job clearing mesquites and cedars from a field so we can plant. They got it done quickly and for a great price. Great folks.
Google review
Fast response to my inquiries. Great to work with! They went above and beyond to help me out with some root balls and lots of trees from the ice storm. We will be using them again.
Google review
Rural Collin County clearing on your own land needs no permit, and agricultural work is exempt from most regulation in Texas. Inside Farmersville city limits, clearing tied to a build runs through the normal process. If your place carries an agricultural valuation, brush control generally supports it, though a call to the appraisal district is worth making before a big change.
Estimates usually happen within a few days of your call. Most residential jobs run one to three days on site, and larger acreage moves at several acres a day with the dedicated mulchers. One local quirk: the blackland clay here gets greasy after rain, so we watch the forecast and schedule around it rather than tearing up your ground. You get a start window with your quote and a heads up before we roll in.
Skid steer mulchers run $3,000 per day with transport included, for material up to 8 inches in diameter. High horsepower dedicated mulchers run $4,000 per day plus transport. Most work here is a day or two on a skid steer. Send photos and acreage for a real number, usually the same day.
That is the classic east Collin County job. We cut a corridor wide enough to work both sides of the wire, take the mesquite, hackberry and bois d arc out of it, and grind everything in place. You end up with a fence line you can rebuild instead of a windrow you now have to deal with.
Blackland clay takes all the organic matter you can give it. A mulch mat on the surface cuts the cracking and crusting bare clay does in a dry August, holds moisture, and feeds the soil as it breaks down. Hauling that material off your own farm is paying to make your dirt worse.
Yes, and it is usually cheaper than people expect. No burn permit, no smoke drifting across a neighbour, and no waiting on the right wind for a week.
Regularly. Downed trees and broken limbs get ground in place rather than hauled, which on a working place is faster and cheaper than clearing it by hand and burning it.
Yes. We open the building envelope, cut the drive line, keep the trees worth keeping, and mill caliche and limestone on site into base for the pad and the drive where the ground gives us the material.
Open blackland with scattered mesquite moves quickly. A tangled creek bottom or a heavy fence row slows down considerably. Dedicated mulchers average 1.5 to 2.5 acres a day in thick material and skid steers half to three quarters.
Yes. Photos, an aerial screenshot, or onX pins with the areas marked get most Farmersville quotes done the same day. Mark what stays and we will price it without you waiting on a site visit.
Every job we publish carries the acreage, the machines, the days on site and what it actually cost. 46 projects documented across Texas so far.
See all our documented projectsFrom Farmersville we cover east Collin County and the farm country toward Hunt County: Nevada, Blue Ridge, Lavon, and Caddo Mills. Close by we also serve Princeton, Greenville, and McKinney. Somewhere else in north Texas? Browse every area we serve or just call.
Quick quotes, competent operators, and top of the line equipment. Dedicated project managers who actually answer the phone, and a family business that actually cares about making customers happy.