PIERCE
LAND
CLEARING
Pierce Land Clearing works Mustang and the small farm country west of Corsicana. Blackland pasture with mesquite working in from the corners and fence lines nobody can see down. Honest day rates and a real machine.
Tell us about your property. We usually reply the same day.
Takes about 30 seconds. No spam, no sales calls, just your quote.
Land clearing in Mustang, Texas is Navarro County pasture work. Mesquite through the open ground, elm and hackberry in the fence lines and low spots.
Around Mustang, Corsicana, Angus and Barry we handle mesquite removal and pasture reclamation, fence row clearing, low ground cleanup, homesite and barn pad prep, driveway corridors, and grinding old push piles. Priced by the machine day, transport shown on the quote.
A full service land clearing company serving Mustang, Corsicana, Angus, Barry, Emhouse, and Navarro County.
Brush and small trees ground into soil-protecting mulch in one pass. No burning, no hauling.
Cut the fire load, free the water table, and open sightlines on cedar-choked ground.
Reclaim overgrown lots, pastures, and fence lines from mesquite and scrub.
Selective take-downs and stump grinding for clean, open ground.
Grubbing, grading, and pad prep that hands your builder permit-ready dirt.
Caliche and crushed base brought in and spread for ranch roads, barn pads and driveways across Navarro County.
Clean corridors for new fencing, utilities, and access roads.
Residential and commercial lots cleared, leveled, and ready.
Stock tanks and ponds dug, shaped, and finished right.
From half acre homesites to utility scale projects, the equipment and crew scale to the job.
Utility corridors, pasture reclamation, invasive cedar and mesquite removal, and prep for whatever you are planning next.
Lot clearing, grubbing, and pad prep that keeps your build schedule on track.
Mesquite and cedar removal, pasture and grazing recovery, fence lines, senderos, stock tanks, and ranch roads.
Multi lot and large acreage clearing with ground left ready for survey, permitting, and infrastructure.
Utility scale site clearing, vegetation removal, and access roads for solar projects across Central Texas.
Transmission lines, pipelines, and fence and utility row corridors cleared to spec and on schedule.
Parks, drainage easements, fire mitigation, and public land maintenance. Easy to work with on bids and compliance.
Senderos, plot clearing, feeder and blind access, and trail systems that make your property huntable again.
We own our machines rather than renting whatever the yard has that week. Not sure which one your ground needs? Try our cost calculator.
Material over 8 inches, heavy cedar and mesquite. Needs room for an 11 foot machine. How we choose.
Material up to 8 inches. Low ground pressure, tight access, and selective work around the trees you want kept.
The photographs on this page are from clearing work on Texas ground of the same kind. For documented jobs with acreage, machines and day counts, see 125 acres of pasture reclaimed at Elgin and 1200 acres cleared at Rosebud.
Documented job: 125 acres of pasture reclaimed at Elgin
Send photos and property details for a fast quote, or meet us on-site and we will walk it with you. Either way you get a firm number, free.
Our crew and machines do the work, selectively and cleanly. The mulch stays right where it falls, protecting the soil and feeding the grass. No burn piles, and no haul off needed.
You get open ground, clean sightlines, and land you can actually use again. If your project calls for full site prep, we handle that too.
Every place is different, so the number comes down to acreage, how thick the mesquite, elm and hackberry has gotten, what you want left standing, and how the machines get through your gates. Transport to Navarro County is built into the quote up front, so the number you are given is the number you pay.
Most companies make you chase a number. Here is ours. The machine we bring depends on the size of your material and the access on your property.
Plus transport to your site
Transport included
Day rates help you budget. When you send photos or have us walk the property, you get a firm total for the whole job, free either way. For a deeper breakdown, read our guide on what it costs to clear land in Texas.
I have used Pierce Land Clearing to clear out property that I own on two different occasions. Each time two different operators but same result: amazing work!!! It is impressive what their forestry mulchers can accomplish so quickly.
Google review
Would recommend A++! Everyone throughout the entire process was a pleasure to work with. Job was done as scheduled and we are very pleased with the results! Our 5 acres never looked better!
Google review
Absolutely the best service you could ask for. When Bobby said he would be at our property every day at 0700 and work from 0730 to 1530 he meant it. He was here every day 5 minutes early.
Google review
Rural Navarro County clearing on your own land needs no permit, and agricultural work is exempt from most regulation in Texas. Inside Mustang city limits, clearing tied to a build runs through the normal permitting process. If your place carries an agricultural exemption, keeping it is worth a call to the county appraisal district before you change how the ground is used.
Estimates usually happen within a few days of your call. Most residential jobs run one to three days on site, and larger acreage moves at several acres a day with the dedicated mulchers. One local quirk: the blackland clay here gets greasy after rain, so we watch the forecast and schedule around it rather than tearing up your ground. You get a start window with your quote and a heads up before we roll in.
Priced by the machine day. A high horsepower mulcher is $4,000 per day plus transport, a skid steer mulcher is $3,000 per day with transport included, and dozer or excavator work is $3,000 per day plus transport. One day minimum on every machine. Most jobs around Mustang are one or two days.
Yes, and it is the main job around Mustang. How we do it depends on what you want after. For real grazing recovery the root crown has to come out, which is dozer or excavator work. For a cleaner look and easier access, mulching is faster and cheaper. We will tell you which your ground needs.
Yes. Old push piles grind faster than standing timber because the material is already down, and it saves you a burn permit and a weather window. Nothing gets hauled off.
Yes. One day is the minimum on every machine and a lot of the fence row and pasture work around here finishes inside that day. You are paying for the day either way, so it is usually worth walking the whole place and picking up every edge while the machine is on the ground.
On rural Navarro County land you own, generally no, and agricultural work is exempt from most regulation in Texas. Inside the Mustang city limit, clearing tied to a build goes through normal permitting. Check before you clear inside the limit.
From the crown, yes, if it is only mulched. Mesquite resprouts from below the soil line, so on ground you want back in production properly the crown has to come out, which is dozer or excavator work rather than a mulching head. We will tell you which your ground needs.
Blackland clay is the reason we ask. Working saturated ground tears ruts that outlast the job and does not clear any faster. If your place is soaked we will tell you to wait rather than take the deposit and make a mess.
Yes, along with the rest of Navarro County. Transport is a written line on the quote reflecting the distance.
It is mulched in place and left as a layer on the soil, which holds ground through a hard rain and slows what tries to come back. No hauling, no burning, no disposal fees.
Every job we publish carries the acreage, the machines, the days on site and what it actually cost. 45 projects documented across Texas so far.
See all our documented projectsFrom Mustang we cover Navarro County: Corsicana, Angus, Barry and Emhouse. See every area we serve.
Quick quotes, competent operators, and top of the line equipment. Dedicated project managers who actually answer the phone, and a family business that actually cares about making customers happy.