PIERCE
LAND
CLEARING
Cedar removal, selective clearing and homesite prep in Annetta North and along the Aledo corridor. Machine day pricing, transport quoted up front.
Tell us about your property. We usually reply the same day.
Takes about 30 seconds. No spam, no sales calls, just your quote.
Annetta North is small acreage country, and that shapes the work more than the vegetation does. Two to ten acre tracts with a house already on most of them, cedar quietly filling in along the back fence and around the tank, and an owner who wants the place back the way it looked when they bought it. This is not clearing raw land, it is recovering ground that was already open.
Practically that means the machine gets picked for maneuvering rather than raw output, because there is a septic field, a well, a fence and a set of oaks out front that all have to survive the job. Forestry mulching handles the cedar and leaves a chip layer instead of a burn pile, which matters on a small place with nowhere to stack anything. Where a pad or a drive is going in, we can grub and shape it in the same trip.
A full service land clearing company serving Annetta North, Aledo, Annetta, Hudson Oaks, and the Aledo Corridor.
Brush and small trees ground into soil-protecting mulch in one pass. No burning, no hauling.
Cut the fire load, free the water table, and open sightlines on cedar-choked ground.
Reclaim overgrown lots, pastures, and fence lines from mesquite and scrub.
Selective take-downs and stump grinding for clean, open ground.
Grubbing, grading, and pad prep that hands your builder permit-ready dirt.
Base rock and crushed limestone brought in and spread for driveways, pads and drainage across Parker County.
Clean corridors for new fencing, utilities, and access roads.
Residential and commercial lots cleared, leveled, and ready.
Stock tanks and ponds dug, shaped, and finished right.
From half acre homesites to utility scale projects, the equipment and crew scale to the job.
Utility corridors, pasture reclamation, invasive cedar and mesquite removal, and prep for whatever you are planning next.
Lot clearing, grubbing, and pad prep that keeps your build schedule on track.
Mesquite and cedar removal, pasture and grazing recovery, fence lines, senderos, stock tanks, and ranch roads.
Multi lot and large acreage clearing with ground left ready for survey, permitting, and infrastructure.
Utility scale site clearing, vegetation removal, and access roads for solar projects across Central Texas.
Transmission lines, pipelines, and fence and utility row corridors cleared to spec and on schedule.
Parks, drainage easements, fire mitigation, and public land maintenance. Easy to work with on bids and compliance.
Senderos, plot clearing, feeder and blind access, and trail systems that make your property huntable again.
We own our machines rather than renting whatever the yard has that week. Not sure which one your ground needs? Try our cost calculator.
Material over 8 inches, heavy cedar and mesquite. Needs room for an 11 foot machine. How we choose.
Material up to 8 inches. Low ground pressure, tight access, and selective work around the trees you want kept.
The photographs on this page are from clearing work on Texas ground of the same kind. For documented jobs with acreage, machines and day counts, see a 12 acre tree preservation job in Georgetown and a 3 acre selective homesite clearing in Cleburne.
Documented job: a 12 acre tree preservation job in Georgetown
Send photos and property details for a fast quote, or meet us on-site and we will walk it with you. Either way you get a firm number, free.
Our crew and machines do the work, selectively and cleanly. The mulch stays right where it falls, protecting the soil and feeding the grass. No burn piles, and no haul off needed.
You get open ground, clean sightlines, and land you can actually use again. If your project calls for full site prep, we handle that too.
Every place is different, so the number comes down to acreage, how thick the cedar, post oak and greenbriar has gotten, what you want left standing, and how the machines get through your gates. Transport to Parker County is built into the quote up front, so the number you are given is the number you pay.
Most companies make you chase a number. Here is ours. The machine we bring depends on the size of your material and the access on your property.
Plus transport to your site
Transport included
Day rates help you budget. When you send photos or have us walk the property, you get a firm total for the whole job, free either way. For a deeper breakdown, read our guide on what it costs to clear land in Texas.
Highly recommend Pierce Land Clearing! Fair price. Showed up on time and work was as promised. 4.5 acres of solid cedar, oak, mesquite etc. taken care of in less than 3 days. I will not shop around on the next project.
Google review
I truly appreciate the integrity of this company and very competitive pricing. Very timely, and communication and payment options were great! I highly recommend this company and we will use them again.
Google review
One word: FANTASTIC!! Thank you Pierce Land Clearing and special thanks to Dustin. We are so pleased!!
Google review
On rural Parker County land you own, clearing generally needs no permit and agricultural work is exempt from most regulation in Texas. Inside the Annetta North town limits, clearing tied to a build runs through normal permitting.
Estimates usually happen within a few days of your call. Most residential jobs run one to three days on site, and larger acreage moves at several acres a day with the dedicated mulchers. One local quirk: post oak sand works wet a good deal better than clay does, so we lose fewer days to rain here than crews do east of the Trinity. You get a start window with your quote and a heads up before we roll in.
Priced by the machine day. A high horsepower mulcher is $4,000 per day plus transport, a skid steer mulcher is $3,000 per day with transport included, and dozer or excavator work is $3,000 per day plus transport. One day minimum on every machine. Most homesite and fence line work around Annetta North is one or two days.
Not from the stump. Ashe juniper, what everybody here calls cedar, does not resprout once it is cut below the lowest green limb, which is why mulching works on it. What comes back is seedlings from the seed already in your soil and from whatever your neighbours have standing. Plan to walk it every few years and knock the new ones down while they are small.
Regularly. Cross Timbers ground goes from sandy loam to limestone shelf in the space of a few feet. A mulching head does not care, but grubbing and digging do, so rock changes the machine and the pace. That is why we walk a property before quoting rather than pricing off an aerial photo.
That is most of what we do here. The post oaks and live oaks are usually the reason somebody bought the place, and cedar is what is choking them. An operator running a mulching head can take juniper out from between oaks without touching the canopy you want kept. Mark anything you want protected before we start and it stays.
It does not affect a mulching job, and that is a real advantage on this ground. Mulching leaves a chip layer on the soil instead of a pile, so there is nothing to burn and nothing to haul off. Parker County sits under a ban a good part of the year, and stacking brush you cannot legally burn just moves the problem to next season.
There is no such thing on the mulching side. Solid cedar brake, cedar, post oak and greenbriar, decades of no management, we have a machine for it. What changes with density is the pace, so heavy ground runs at the slower end of a machine day and open ground at the faster end. Acreage on its own will not tell you the number.
On rural land you own, generally no, and agricultural work is exempt from most regulation in Texas. Inside a city limit, clearing tied to a build runs through normal permitting. If your place carries an agricultural valuation, call the appraisal district before you change how the land is used.
Usually within a couple of weeks, sometimes faster if a job ahead of us finishes early. Send photos and acreage and we can normally put a real number on it the same day. Transport is quoted up front, so the figure you are given is the figure you pay.
Every job we publish carries the acreage, the machines, the days on site and what it actually cost. 41 projects documented across Texas so far.
See all our documented projectsFrom Annetta North we cover the Aledo Corridor: Aledo, Annetta, Hudson Oaks. See every area we serve.
Quick quotes, competent operators, and top of the line equipment. Dedicated project managers who actually answer the phone, and a family business that actually cares about making customers happy.